Click Here To Contact Us Today!

Accessory Mount Clamps


Accessory Mount Clamps




Help


Come in Pairs of Two


These are ADDITIONAL clamps that allow for other uses.


Accessory Mount includes pair of clamps for your tube.




Price: $8.00

Quantity:



Description

Product Description Overview

When you buy an Accessory Mount or Flag Mount, you get a pair of these very handy clamps. They are super useful in lots of other places as well. We use them in some of our Fairing Mounts, our Long Wheelbase Light Mounts, and even on some of the equipment around the shop! Get different sized pair for your already super-adaptable Accessory Mount and give it an extra dose of ultra-adaptability, or create your own uses!

Seven different size clamps fit just about any bike. Adjusting shims included to get the exact fit. Their stainless steel socket head cap screw maximizes durability and strength, while their smooth, black super tough nylon makes them an inconspicuous and sleek addition to any cycle.

Accessory Mounts allow for crazy clever configurations, so if your clamps need to be different sizes, make a note of it on your order. Check out our Accessory Mount Gallery to see what others have done!






FAQ

1. What are these, anyway?

They are Cateye brand plastic mounting clamps, modified in a handy way for use with attaching our Accessory Mounts.

2. How do I know what size I need?

You need to measure the outer diameter of the tube at the point at which you want to clamp. Then, choose the size of clamp that covers the size of your tube. You fine tune the fit of the clamp by trimming the length of the provided shim (the shim isn't needed for paint protection, it's purpose is to adjust the fit).

3. You sell them in pairs, right?

Yes, this price is for a pair. If you are doing something creative that involves attaching to two DIFFERENT sized tubes, we can manage that. Just make note of this on your order.

4. Can I use them on tubes that aren't round?

Yes, as long as they are not too far off round. An oval of about 2:3 is about the max you can do.

More Details

More Details
These clamps are modified Cateye brand clamps. Cateye clamps are the best plastic band clamps made. We've made them even more useful by pressing in an anodized aluminum spacer and replacing the attachment screw with a stainless steel bolt.

The clamps come in 1/8 inch increments from 1/2 inch to 1-1/4 inch. Order the size that covers the size of tube you have.

Technical Info

Cateye brand nylon band mounting clamps with trimmable adjusting shim. Modified by adding a spacer to move the attachment point out and provide a firm base for attaching things like Accessory Mounts. We replace the black steel screw provided by Cateye with a stainless allen head bolt so you can use regular bike tools (and not have to worry about rust).

Owner's Manual

1. Remove the stainless bolt.

2. Snap the clamp over the tube and pinch the ears together with your fingers. The gap between the ears should be parallel or nearly so. If the gap is open and V shaped, shorten the supplied shim. Start by trimming the shim by about 25%. Center the shim in the clamp and test again. Repeat until the fit is right.

3. Install the Accessory Mount or whatever you are attaching.

 

Compatible Bike List

Compatible with all bikes and trikes with round or nearly round tubes in the range of 1/2 inch (12mm) to 1-3/8 inch (35mm).

 


Copyright © 2017 TerraCycle
Questions or Comments? Contact Us